Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 | // SPDX-License-Identifier: GPL-2.0 /* * Device Tree Source for the iWave-RZG1E-G22M SODIMM SOM * * Copyright (C) 2017 Renesas Electronics Corp. */ #include "r8a7745.dtsi" #include <dt-bindings/gpio/gpio.h> / { compatible = "iwave,g22m", "renesas,r8a7745"; memory@40000000 { device_type = "memory"; reg = <0 0x40000000 0 0x20000000>; }; reg_3p3v: 3p3v { compatible = "regulator-fixed"; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; regulator-boot-on; }; }; &cmt0 { status = "okay"; }; &extal_clk { clock-frequency = <20000000>; }; &pfc { mmcif0_pins: mmc { groups = "mmc_data8", "mmc_ctrl"; function = "mmc"; }; qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data2"; function = "qspi"; }; sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; power-source = <3300>; }; i2c3_pins: i2c3 { groups = "i2c3_b"; function = "i2c3"; }; }; &mmcif0 { pinctrl-0 = <&mmcif0_pins>; pinctrl-names = "default"; vmmc-supply = <®_3p3v>; bus-width = <8>; non-removable; status = "okay"; }; &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; status = "okay"; /* WARNING - This device contains the bootloader. Handle with care. */ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "sst,sst25vf016b", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; spi-tx-bus-width = <1>; spi-rx-bus-width = <1>; m25p,fast-read; spi-cpol; spi-cpha; }; }; &rwdt { timeout-sec = <60>; status = "okay"; }; &sdhi1 { pinctrl-0 = <&sdhi1_pins>; pinctrl-names = "default"; vmmc-supply = <®_3p3v>; vqmmc-supply = <®_3p3v>; cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; status = "okay"; }; &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; status = "okay"; clock-frequency = <400000>; rtc@68 { compatible = "ti,bq32000"; reg = <0x68>; }; }; |