Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 | # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- $id: http://devicetree.org/schemas/mtd/partitions/fixed-partitions.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Fixed partitions description: | This binding can be used on platforms which have strong conventions about which portions of a flash are used for what purposes, but which don't use an on-flash partition table such as RedBoot. The partition table should be a node named "partitions". Partitions are then defined as subnodes. maintainers: - Rafał Miłecki <rafal@milecki.pl> properties: compatible: const: fixed-partitions "#address-cells": true "#size-cells": true patternProperties: "@[0-9a-f]+$": $ref: "partition.yaml#" required: - "#address-cells" - "#size-cells" additionalProperties: true examples: - | partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0000000 0x100000>; read-only; }; uimage@100000 { reg = <0x0100000 0x200000>; }; }; - | partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <2>; /* a 4 GiB partition */ partition@0 { label = "filesystem"; reg = <0x00000000 0x1 0x00000000>; }; }; - | partitions { compatible = "fixed-partitions"; #address-cells = <2>; #size-cells = <2>; /* an 8 GiB partition */ partition@0 { label = "filesystem #1"; reg = <0x0 0x00000000 0x2 0x00000000>; }; /* a 4 GiB partition */ partition@200000000 { label = "filesystem #2"; reg = <0x2 0x00000000 0x1 0x00000000>; }; }; - | partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "bootloader"; reg = <0x000000 0x100000>; read-only; }; firmware@100000 { compatible = "brcm,trx"; label = "firmware"; reg = <0x100000 0xe00000>; }; calibration@f00000 { compatible = "fixed-partitions"; label = "calibration"; reg = <0xf00000 0x100000>; ranges = <0 0xf00000 0x100000>; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "wifi0"; reg = <0x000000 0x080000>; }; partition@80000 { label = "wifi1"; reg = <0x080000 0x080000>; }; }; }; |